Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-20001.png)
Blower Motor Relay: Testing and Inspection
HEATER MAIN RELAY
INSPECTION
1. Access cab, Standard cab: REMOVE HEATER MAIN RELAY FROM ENGINE ROOM RELAY BLOCK
2. Double cab: REMOVE HEATER MAIN RELAY FROM ENGINE ROOM RELAY BLOCK NO. 2 NO. 2
2. INSPECT HEATER MAIN RELAY (Marking: HEATER) CONTINUITY
If continuity is not as specified, replace the relay.
