Tundra 2WD V6-3.4L (5VZ-FE) (2004)
1. Using a screwdriver, remove the cap.
HINT: Tape the screwdriver tip before use.
2. Remove the bolt and front seat outer belt shoulder anchor.
f.
Remove the retractor of front seat outer belt.
CAUTION: Never disassemble the front seat outer belt.
NOTE: When removing the retractor of front seat outer belt, take care not to pull the seat belt pretensioner wire harness.
1. Using a screwdriver, pull the locking button of the pretension connector to your side to release the lock.
HINT: Tape the screwdriver tip before use.
2. Disconnect the connector.
3. Remove the 2 bolts and the front seat outer belt assembly.
5. Double cab:
REMOVE REAR SEAT OUTER BELT
a. Remove the rear door scuff plate.
1. Remove the 3 screws.
2. Using a screwdriver, disengage the clip and remove the rear door scuff plate.
HINT: Tape the screwdriver tip before use.
3. Remove the rear door opening trim weatherstrip.