Tundra 2WD V6-3.4L (5VZ-FE) (2004)
2. Connect the pretensioner connector as shown in the illustration.
b. Install the quarter trim.
1. Install the quarter trim.
2. Install the front seat outer belt shoulder anchor with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
3. Install the cap.
4. Install the quarter trim belt hole cover.
c. Install the front seat outer belt floor anchor with the bolt.
d. Install the back panel upper garnish.
e. Install the front pillar garnish.
1. Install the front pillar garnish.