Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-1310001.png)
Seat Sensor/Switch: Testing and Inspection
Double cab (Passenger's seat only): INSPECT SEAT BELT WARNING OCCUPANT DETECTION SENSOR CONTINUITY
Check that continuity exists between terminals 1 and 2 when pressing the sensing part.
If the continuity is not as specified, replace the sensor.
Except double cab (Passenger's seat only): INSPECT SEAT BELT WARNING OCCUPANT DETECTION SENSOR CONTINUITY
Check that continuity exists between terminals 1 and 2 when pressing the sensing part.
If the continuity is not as specified, replace the sensor.
