Tundra 2WD V6-3.4L (5VZ-FE) (2004)
![background image](/toyota/tundra_2wd/v6-3.4l_(5vz-fe)/Page-212002.png)
1. LH:
REMOVE FRONT AIRBAG SENSOR
a. 2UZ-FE:
Remove the battery carrier, battery and battery tray.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor.
2. RH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the air cleaner assembly.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor.
INSTALLATION
INSTALL FRONT AIRBAG SENSORS