Tundra 2WD V6-3.4L (5VZ-FE) (2004)
![background image](/toyota/tundra_2wd/v6-3.4l_(5vz-fe)/Page-1034005.png)
D.
Disconnect the wire clamp.
E.
Disconnect the 2 wire clamps and remove the engine No. 2 wire harness.
HINT:
Unlock the clamp with a long flathead screwdriver.
NOTE:
Be careful not to install the new engine No.2 wire harness as shown in the illustration. The ground should not wrap around engine No.2 wire
harness.