Tundra 2WD V6-3.4L (5VZ-FE) (2004)
![background image](/toyota/tundra_2wd/v6-3.4l_(5vz-fe)/Page-994002.png)
a. Remove the 2 screws.
Torque:
1.2 kW, 1.4 kW type
: 5.9 N.m (60 kgf.cm, 52 in.lbf)
1.8 kW type
: 9.3 N.m (95 kgf.cm, 82 in.lbf)
b. Remove the starter housing, return spring, bearing, idler gear and clutch assembly from the magnetic switch assembly.
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch shaft hole.
4. REMOVE BRUSH HOLDER
a. Remove the 2 screws and end cover from the field frame.
Torque:
1.2 kW, 1.4 kW type
: 1.5 N.m (15 kgf.cm, 13 in.lbf)
1.8 kW type
: 3.8 N.m (38 kgf.cm, 34 in.lbf)