Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-1138004.png)
e. Bend the spring clips.
Using a hammer, bend the spring clips into the position.
INSTALLATION
1. INSTALL LEAF SPRING
Install the shackle and leaf spring with 3 bolts, washers and nuts.
Torque: 170 Nm (1,735 kgf-cm, 125 ft. lbs.)
HINT: After stabilizing the suspension, torque the nuts.
2. INSTALL U-BOLTS
Install the spring bumper, spring seat and 2 U-bolts with the 4 washers and nuts.
Torque: 133 Nm (1,350 kgf-cm, 98 ft. lbs.)
HINT: Tighten the U-bolts so that the lengths of all the U-bolts under the spring seat are the same.
3. INSTALL REAR WHEEL
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)
4. REMOVE SAFETY STANDS
