Tundra 2WD V6-3.4L (5VZ-FE) (2004)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
REMOVAL
REMOVE PROPELLER SHAFT
a. Place matchmarks on the differential and propeller shaft flanges.
b. Remove the 4 bolts, washers and nuts.
c. Remove the 2 mounting bolts and center support bearing from the frame crossmember.
d. Pull out the propeller shaft yoke from the transmission.
e. Insert SST in the transmission to prevent oil leakage.
SST 09325-40010
INSTALLATION