Tundra 2WD V6-4.0L (1GR-FE) (2005)
HINT: Tape the screwdriver tip before use.
c. Disconnect the connector.
30. REMOVE SUN VISORS AND HOLDERS
31. REMOVE ROOF HEADLINING
Using a clip remover, remove the 3 clips and headlining.
32. REMOVE ROOF SILENCER PAD
33. REMOVE FRONT SIDE RAIL SPACER LH
34. REMOVE FRONT SIDE RAIL SPACER RH
35. REMOVE REAR NO. 2 SIDE RAIL SPACER LH
36. REMOVE REAR NO. 2 SIDE RAIL SPACER RH
37. REMOVE FRONT PILLAR SPACER NO. 1 LH
38. REMOVE FRONT PILLAR SPACER NO. 1 RH
39. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
40. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH
41. REMOVE INSTRUMENT PANEL LH
42. REMOVE INSTRUMENT PANEL RH
43. REMOVE CENTER PILLAR GARNISH PAD NO. 1 LH
44. REMOVE CENTER PILLAR GARNISH PAD NO. 1 RH
45. REMOVE ROOF HEADLINING TRIM RETAINER FRONT LH
46. REMOVE ROOF HEADLINING TRIM RETAINER FRONT RH
47. REMOVE FRONT VISOR SUPPORT PAD LH
48. REMOVE FRONT VISOR SUPPORT PAD RH
49. REMOVE ROOF HEADLINING TRIM RETAINER REAR LH
50. REMOVE ROOF HEADLINING TRIM RETAINER REAR RH
51. REMOVE ROOF HEADLINING PAD LH
52. REMOVE ROOF HEADLINING PAD RH
INSTALLATION
Installation is in the reverse order of removal.