Tundra 2WD V6-4.0L (1GR-FE) (2005)
c. Use the same procedures described above to the other side.
3. INSTALL TAILGATE LOCK STRIKER
Using a Torx(R) socket wrench (T40), install the 2 tailgate lock strikers with the 4 screws.
Torque: 13 N.m (133 kgf.cm, 10 ft.lbf)
4. INSTALL TAILGATE HANDLE ASSEMBLY
Install the tailgate handle assembly with the 2 bolts.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
5. INSTALL TAILGATE LOCK
a. Using a Torx(R) socket wrench (T40), install the 2 tailgate locks with the 4 screws.
Torque: 12.5 N.m (128 kgf.cm, 9 ft.lbf)
b. Connect one end of the tailgate lock link to the tailgate lock and another end to the tailgate handle assembly.
6. INSTALL SERVICE HOLE COVER
Using a Torx(R) socket wrench (T30), install the service hole cover with the 8 screws.
7. INSTALL TAILGATE PROTECTOR