Tundra 2WD V6-4.0L (1GR-FE) (2005)
8. REMOVE EXHAUST MANIFOLD RH
Remove the 6 nuts, exhaust manifold RH and gasket.
9. REMOVE A/F SENSOR (BANK 2)
a. Disconnect the A/F sensor connector.
b. Remove the A/F sensor.
10. REMOVE EXHAUST MANIFOLD LH
Remove the 6 nuts, exhaust manifold LH and gasket.
11. INSTALL EXHAUST MANIFOLD RH
a. Set a new gasket to the RH cylinder head with the oval shape facing forward.
NOTE: Be careful of the installation direction.