Tundra 2WD V6-4.0L (1GR-FE) (2005)
Control Assembly: Service and Repair
Air Conditioning Control Assembly
Removal and Installation
REMOVAL
REMOVE CENTER CLUSTER INTEGRATION PANEL
a. Remove the 3 heater control knobs.
b. Remove the 5 screws.
c. Remove the integration control panel by pulling the portions indicated by arrows in the illustration.
d. Disconnect the connector.
INSTALLATION
The installation procedures are the removal procedures in reverse order.
Disassembly and Reassembly
DISASSEMBLY
1. Access cab, Standard cab:
REMOVE AIRBAG INDICATOR CIRCUIT
Release the 2 claws and remove the indicator circuit, then disconnect the connector.