Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-297003.png)
Amount to turn adjusting cams (by graduation)
Example:
Front cam: 1.4 (+) Direction
Rear cam: 1.5 (+) Direction
d. Torque the front and/or rear adjusting cam set bolts.
Torque: 130 Nm (1,325 kgf-cm, 96 ft. lbs.)
5. INSPECT TOE-IN
If the toe-in is not within the specified value, adjust the rack ends.
6. ADJUST TOE-IN AND WHEEL ANGLE
