Tundra 2WD V6-4.0L (1GR-FE) (2005)
Drive Belt: Testing and Inspection
Charging System
INSPECT DRIVE BELT
a. Visually check the belt for excessive wear, frayed cords etc.
HINT:
-
If any defect has been found, replace the drive belt.
-
Cracks on the rib side of a belt are considered acceptable.
If the belt has chunks missing from the ribs, it should be replaced.
b. Check that it fits properly in the ribbed grooves.
HINT: Check with your hand to confirm that the belt has not slipped out of the groove on the bottom of the pulley.