Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-316001.png)
Drive Belt: Service and Repair
REMOVAL
1. 1GR-FE engine:
REMOVE DRIVE BELT
a. Remove the engine under cover.
b. Loosen the belt tension by turning the belt tensioner counterclockwise, and remove the drive belt from the belt tensioner.
2. 2UZ-FE engine:
REMOVE DRIVE BELT
Loosen the drive belt tension by turning the drive belt tensioner counterclockwise, and remove the drive belt.
INSTALLATION
1. 1GR-FE engine:
INSTALL DRIVE BELT