Tundra 2WD V6-4.0L (1GR-FE) (2005)
Maintenance Required Lamp/Indicator: Service and Repair
Maintenance Liquid Resetting Procedures
MAINTENANCE LIQUID RESETTING PROCEDURE
a. Set the display window to ODO.
b. Turn the ignition switch off.
c. Pressing the reset switch, turn the ignition switch to the ON position (keep pressing for at least 5 seconds.)
d. Reset procedure is completed.
HINT:
-
If the ignition switch is turned off during the reset procedure.
LCD: off
IND: off
-
If the reset switch is pressed off during the reset procedure.
LCD: return to ODO
IND: Keep the previous state of reset