Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-615007.png)
a. Select "BUS CHECK" from the "OBD/MOBD MENU" screen.
b. Press "ENTER" on the hand-held tester via CAN VIM.
c. The screen displays the ECUs and sensors that are properly connected to the CAN communication system.
HINT: There is a communication stop in the system of any properly connected ECUs or sensors that are not displayed.
Diagnosis By Symptom
PROBLEM SYMPTOMS TABLE
1. COMMUNICATION STOP MODE TABLE
Problem Symptoms Table