Tundra 2WD V6-4.0L (1GR-FE) (2005)
Variable Valve Timing Actuator Position Sensor: Service and Repair
VVT SENSOR
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE V-BANK COVER
3. REMOVE AIR CLEANER
4. REMOVE VVT SENSOR
a. RH bank side VVT sensor.
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
b. LH bank side VVT sensor.
1. Disconnect the water by-pass hose No. 4 and No. 5.
2. Disconnect the VVT sensor connector.
3. Remove the bolt and VVT sensor.
INSTALLATION
1. INSTALL VVT SENSOR