Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-727001.png)
Fuel Pump Relay: Testing and Inspection
Circuit Opening Relay
INSPECTION
1. REMOVE CIRCUIT OPENING RELAY
2. INSPECT CIRCUIT OPENING RELAY
a. Using an ohmmeter, check for continuity between each terminal.
b. Using an ohmmeter, check for continuity between terminals 3 and 5 when the battery voltage is applied across terminals 1 and 2.
Specified condition: Continuity
3. INSTALL CIRCUIT OPENING RELAY