Tundra 2WD V6-4.0L (1GR-FE) (2005)
(3) Temporarily put the No.1 chain on the No.2 chain of the camshaft timing gear assembly.
(4) Align the knock pin hole on the camshaft timing gear assembly with the knock pin of the No.1 camshaft, and insert the No.1 camshaft into
the camshaft timing gear assembly.
(5) Temporarily install the camshaft timing gear assembly set bolt.
(6) Set the No.1 camshaft onto the RH cylinder head with the cam lobes of the No.1 cylinder facing downward as shown in the illustration.
(7) Install the 4 bearing caps in their proper locations.
(8) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.
(9) Install the 8 bearing cap bolts. Using several steps, tighten the bolts uniformly in the sequence as shown in the illustration.