Tundra 2WD V6-4.0L (1GR-FE) (2005)
f.
Turn SST (B), and remove SST (A) and (B).
g. Remove the pulley nut and pulley.
2. REMOVE GENERATOR REAR END COVER
a. Place the generator on the pulley.
b. Remove the 3 nuts and rear end cover.
3. REMOVE TERMINAL INSULATOR
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
a. Remove the plate seal.
b. Remove the 2 nuts and brush holder.
c. Remove the plate seal.