Tundra 2WD V6-4.0L (1GR-FE) (2005)
b. Install starter-commutator-end-frame to starter yoke assembly.
7. INSTALL STARTER YOKE ASSEMBLY
a. Align the key of the starter yoke assembly with the keyway of starter drive housing.
b. Install the starter yoke assembly with the 2 through bolts.
Torque: 6.0 N.m (61 kgf.cm, 53 in.lbf)
8. INSTALL REPAIR SERVICE STARTER KIT
a. Apply grease to the plunger and hook.
b. Hang the plunger hook of the repair service starter kit to the drive lever.
c. Install the plunger and return spring.
d. Install the repair service starter kit with the 2 screws.