Tundra 2WD V6-4.0L (1GR-FE) (2005)
j.
With the engine idling and the valve fully opened, turn the steering wheel left or right to the full lock position.
Minimum fluid pressure: 8,336 kPa (85 kgf/cm2, 1,209 psi)
NOTICE:
^
Do not keep the steering wheel in the full lock position for more than 10 seconds.
^
Do not allow the fluid temperature to become too high.
k. Disconnect the SST
SST 09640-10010 (09641-01010, 09641-01030, 09641-01060)
l.
Connect the pressure feed tube.
(1GR-FE engine: See POWER STEERING VANE PUMP INSTALLATION. See: Power Steering Pump/Service and Repair/Power Steering
Vane Pump (1GR-FE)/Installation)
(2UZ-FE engine: See POWER STEERING VANE PUMP INSTALLATION. See: Power Steering Pump/Service and Repair/Power Steering
Vane Pump (2UZ-FE)/Installation)
m. 2UZ-FE engine:
Install the air cleaner assembly with the air cleaner hose.
n. Bleed air from the power steering system.