Tundra 2WD V6-4.0L (1GR-FE) (2005)
a. Using SST, press out the oil seal and bearing from the control valve housing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07150)
b. Coat a new oil seal lip with power steering fluid.
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00180, 09951-00320, 09952-06010), 09950-70010 (09951-07150)
NOTICE: Make sure to install the oil seal in the correct direction.
d. Coat a new bearing with molybdenum disulfide lithium base grease.
e. Using SST, press in the bearing.
SST 09950-60010 (09951-00340), 09950-70010 (09951-07150)
2. IF NECESSARY, REPLACE 2 BEARINGS
a. Using SST, press out the bearing.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07150)