Tundra 2WD V6-4.0L (1GR-FE) (2005)
COMPONENTS
INSTALLATION
1. INSTALL SHOCK ABSORBER WITH COIL SPRING
a. Install the upper side of the shock absorber to the chassis frame with the 3 nuts.
Torque: 64 Nm (650 kgf-cm, 47 ft. lbs.)
b. Connect the lower side of the shock absorber to the lower suspension arm with the bolt, washer and nut.
Torque: 135 Nm (1,400 kgf-cm, 100 ft. lbs.)
2. INSTALL FRONT WHEEL
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)
Disassembly
FRONT SHOCK ABSORBER