Tundra 2WD V6-4.0L (1GR-FE) (2005)
d. Connect the 7 solenoid valve connectors.
e. Install the 2 ATF temperature sensors and clamps to the valve body with the 2 bolts.
HINT: In order to install the ATF temperature sensors properly, check the wire harness color prior to installation.
6. INSTALL OIL STRAINER
7. INSTALL OIL PAN
HINT: Remove any packing material, and be careful not to spill oil on the contacting surfaces of the transmission case and the oil pan.
Using a new gasket, install the oil pan with the 20 bolts.
Torque: 4.4 Nm (45 kgf-cm, 39 inch lbs.)
8. FILL WITH ATF AND CHECK ATF LEVEL
a. Remove the refill plug.
b. Fill with new fluid through the refill hole.
Fluid type: Toyota genuine ATF WS