Tundra 2WD V6-4.0L (1GR-FE) (2005)
NOTE:
-
Allow the primer coating for 3 minutes or more.
-
Throw away leftover Primer G.
6. Fixed type:
APPLY ADHESIVE
a. Cut off the tip of the cartridge nozzle.
Adhesive: Part No. 08850-00801 or equivalent
HINT: After cutting off the tip, use all adhesive within the time described in the table.
b. Load the cartridge into a sealer gun.
c. Coat the glass with adhesive, as shown in the illustration.
7. Slide type, Power slide type:
APPLY ADHESIVE