Tundra 2WD V8-4.6L (1UR-FE) (2010)
Parking Brake Pedal: Removal and Replacement
Components
PARKING BRAKE: PARKING BRAKE PEDAL: COMPONENTS
Removal
PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
2. RELEASE PARKING BRAKE PEDAL
3. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Removal
5. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Driver Side Knee Airbag Assembly/Removal
6. DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the lock nut and adjustment nut.