toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Powertrain Management > < Exhaust Pipe (Except Regular Cab Standard Deck)|Page 2629

Tundra 2WD V8-4.6L (1UR-FE) (2010)

Page 8
background image

(c) Connect the tailpipe to the center exhaust pipe.

(d) Attach a new clamp to the tailpipe and center exhaust pipe. Then install the bolt to the clamp.

Torque : 32 Nm (326 kgf-cm, 24 ft-lbf)

HINT
Install the clamp within the angle range shown in the illustration.

14. INSPECT FOR EXHAUST GAS LEAK   See: Exhaust Manifold/Service and Repair/Installation

Powertrain Management > < Exhaust Pipe (Except Regular Cab Standard Deck)|Page 2629