Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1954001.png)
Auxiliary Power Outlet Switch: Service and Repair
Installation
OTHER SYSTEM: INVERTER MAIN SWITCH (for CrewMax): INSTALLATION
1. INSTALL INVERTER MAIN SWITCH
(a) Attach the 2 claws to install the main switch.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Floor Shift Type)/Installation
3. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Floor Shift Type)/Installation
4. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Regular Cab)/Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(For Double Cab)/Installation
