Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-25002.png)
2. REMOVE REAR DOOR SCUFF PLATE RH
(a) Detach the 8 claws and 2 clips, and remove the scuff plate.
3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Removal
5. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the door control receiver connector.
(b) Remove the bolt and receiver.
Installation
DOOR LOCK: DOOR CONTROL RECEIVER (for CrewMax): INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the receiver with the bolt.
(b) Connect the door control receiver connector.
2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Installation
3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
4. INSTALL REAR DOOR SCUFF PLATE RH