Toyota Workshop Service and Repair Manuals

Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Install the receiver with the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the receiver connector.

2. INSTALL ROOF HEADLINING ASSEMBLY

(a) for Regular Cab:

Install the roof headlining    See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Regular
Cab)/Installation.

(b) for Double Cab:

Install the roof headlining    See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Double
Cab)/Installation.

(c) for CrewMax:

Install the roof headlining    See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Installation.