Tundra 2WD V8-4.6L (1UR-FE) (2010)
Wiper Switch: Service and Repair
Installation
WIPER AND WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Attach the claw to install the wiper switch.
(b) Connect the 2 connectors.
2. INSTALL UPPER STEERING COLUMN COVER
(a) Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.
(b) Attach the claw to install the upper steering column cover.
3. INSTALL LOWER STEERING COLUMN COVER
(a) Attach the 2 claws to install the lower steering column cover.
NOTICE:
Do not damage the tilt and telescopic switch.
(b) Using a screwdriver, while turning the steering wheel to the right and left, install the 2 screws and lower steering column cover.