Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2582005.png)
3. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
(a) Align the keyhole and protrusion as shown in the illustration.
(b) Install the sensor retainer to the rear bumper.
NOTICE:
Do not damage the bumper with the protrusion when installing the retainer.
4. INSTALL NO. 2 ULTRASONIC SENSOR
(a) Attach the 2 claws to install the ultrasonic sensor.
5. INSTALL REAR BUMPER BAR (for Steel Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Steel Type Bumper)/Installation
6. INSTALL REAR BUMPER COVER (for Resin Type Bumper) See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and
