Tundra 4WD V8-4.6L (1UR-FE) (2010)
Rear Vision Camera: Service and Repair
Installation
PARK ASSIST / MONITORING: TELEVISION CAMERA: INSTALLATION
HINT
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts
1. INSTALL TELEVISION CAMERA ASSEMBLY
(a) Attach the 3 clamps and install the television camera with the 2 bolts.
(b) Connect the television camera connector.
2. INSTALL TAIL GATE SERVICE HOLE COVER See: Body and Frame/Tailgate/Service and Repair/Tail Gate/Installation
3. CHECK TELEVISION CAMERA ASSEMBLY ANGLE
(a) Move the shift lever to R and check that the rear view image in the display has no lines or distortion and has good color.