Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Attach the 6 clips to install the quarter trim panel lower.
(b) Install the seat belt anchor with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Attach the 2 claws to install the cover.
4. INSTALL REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Double Cab)/Installation
5. INSTALL REAR SEAT ASSEMBLY
(a) Install the rear seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Double
Cab)/Installation.