Tundra 4WD V8-4.6L (1UR-FE) (2010)
(b) Detach the 2 claws and remove the switch.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: INSTALLATION
1. INSTALL CURTAIN SHIELD AIRBAG CUTOFF SWITCH
(a) Attach the 2 claws to install the switch.
(b) Connect the connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
3. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
4. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Double Cab)/Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Roof Headlining (For Double Cab)/Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (For Regular Cab)/Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.