Tundra 4WD V8-4.6L (1UR-FE) (2010)
6. REMOVE PLANETARY GEAR
(a) Remove the 3 planetary gears.
Reassembly
1UR-FE STARTING: STARTER (for 2.0 kW Type): REASSEMBLY
1. INSTALL PLANETARY GEAR
(a) Apply high temperature grease to the planetary gears and pins of the starter center bearing clutch, as shown in the illustration.
(b) Install the 3 planetary gears.
2. INSTALL STARTER ARMATURE PLATE
(a) Install the plate to the starter center bearing clutch.
NOTICE:
Check that the protrusion of the starter armature plate fits in the notch of the starter center bearing clutch.
3. INSTALL STARTER ARMATURE ASSEMBLY
(a) Install the starter armature to the starter center bearing clutch.
4. INSTALL STARTER YOKE ASSEMBLY
(a) Align the protrusion of the starter center bearing clutch with the notch of the starter yoke, and install the starter yoke.