Tundra 4WD V8-4.7L (2UZ-FE) (2003)
B.
Using Snap ring pliers, install a NEW snap ring.
17.
INSTALL NEW OIL SEAL (OUTSIDE)
A.
Using the following SSTs and a plastic hammer, install a NEW oil seal (outside).
^
09223-15030
^
09527-17011
B.
Coat MP grease to the oil seal lip.
18.
INSTALL NEW DUST COVER AND AXLE HUB TO STEERING KNUCKLE
A.
Install the NEW dust cover to the steering knuckle with the 4 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
B.
Using the following SST and a press, install the axle hub to the steering knuckle.
09649-17010
19.
INSTALL ABS SPEED SENSOR
ROTOR (W/ABS) OR SPACER (W/O ABS)
NOTE:
Take care not to scratch the serration of the speed sensor rotor.