Tundra 4WD V8-4.7L (2UZ-FE) (2003)
9. REMOVE NO.4 HEATER TO REGISTER DUCT
10. REMOVE COOLING UNIT
a. Disconnect the connectors.
b. Remove the 3 screws, bolt and the cooling unit.
INSTALLATION
Installation is in the reverse order of removal.
9. REMOVE NO.4 HEATER TO REGISTER DUCT
10. REMOVE COOLING UNIT
a. Disconnect the connectors.
b. Remove the 3 screws, bolt and the cooling unit.
INSTALLATION
Installation is in the reverse order of removal.