Tundra 4WD V8-4.7L (2UZ-FE) (2003)
3. INSPECT THERMISTOR RESISTANCE
a. Disconnect the connector.
b. Measure resistance between terminals.
Standard resistance: 1,500 ohms at 25 °C (77 °F).
If resistance is not as specified, replace the thermistor.
3. INSPECT THERMISTOR RESISTANCE
a. Disconnect the connector.
b. Measure resistance between terminals.
Standard resistance: 1,500 ohms at 25 °C (77 °F).
If resistance is not as specified, replace the thermistor.