Tundra 4WD V8-4.7L (2UZ-FE) (2003)
12.
Install the NEW A/C compressor mounting bracket and hand tighten bolts 1 and 2 while holding the bracket forward (refer to illustration).
13.
While holding the bracket forward, tighten the A/C compressor mounting bolts in the following sequence: bolt 2, bolt 1, bolt 3.
Torque: 47 N.m (475 kgf.cm, 34 ft.lbf)
14.
Remove the accessory drive belt tensioner.
15.
Install the NEW accessory drive belt tensioner.
16.
Reassemble in the reverse order of disassembly.
17.
Refill cooling system.