Tundra 4WD V8-4.7L (2UZ-FE) (2003)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
REMOVAL
1. SUPPORT BODY WITH SAFETY STANDS
a. Jack up and support the body on safety stands.
b. Lower the axle housing until the leaf spring tension is free, and keep it at this position.
2. REMOVE REAR WHEEL
3. REMOVE REAR SHOCK ABSORBER
a. Remove the bolt and nut on the lower side of the shock absorber.
b. While holding the piston rod, remove the nut, retainer, cushion and shock absorber.
c. Remove the 2 retainers and cushion from the shock absorber.
INSPECTION
INSPECT SHOCK ABSORBER