Tundra 4WD V8-4.7L (2UZ-FE) (2003)
SST 09330-00021
Torque: 181 Nm (1,845 kgf-cm, 133 ft. lbs.)
f.
Loosen the nut.
g. Torque the nut again.
Torque: 82 Nm (835 kgf-cm, 60 ft. lbs.)
h. Using a hammer and punch, stake the nut.
3. Rear propeller shaft: INSTALL PROPELLER SHAFT
a. Align the matchmarks on the flanges and connect the flanges with 4 bolts, washers and nuts.
HINT: If replacing either the center flange or intermediate shaft, reassembly it so that the front side flange yoke of the intermediate shaft and
the rear side flange yoke of the propeller shaft are facing in the same direction.
b. Torque the bolts.
Torque: 74 Nm (750 kgf-cm, 54 ft. lbs.)