Tundra 4WD V8-4.7L (2UZ-FE) (2003)
2WD and 4WD front propeller shaft
b. Using a hammer, tap the yoke until there is no clearance between the bearing outer race and snap ring.
7. CHECK SPIDER BEARING
a. Check that the spider bearing moves smoothly.
b. Check the spider bearing axial play.
Maximum bearing axial play:
4WD rear propeller shaft: 0 mm (0 inch)
2WD and 4WD front propeller shaft: 0.05 mm (0.0020 inch)
HINT:
^
Install new spider bearings on the flange side in the procedure described above.