Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1385001.png)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
a. Using a T30 "TORX" wrench, remove the 3 screws and actuator bracket.
REASSEMBLY
1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY
a. Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws.
Torque: 9.5 N.m (97 kgf.cm, 84 in.lbf)
