Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
10. REMOVE SUB-VISORS
Remove the 4 screws and 2 sub-visors.
11. REMOVE FRONT PERSONAL LIGHT
a. Using a screwdriver, remove the left side lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws.
c. Using a screwdriver, rotate the clip by 90 degrees and remove it.
HINT: Tape the screwdriver tip before use.
d. Remove the front personal light, then disconnect the connector.
HINT: At the time of installation, please refer to the following item. When installing the front personal light, attach the clip to the housing and
push it to the bracket.
12. REMOVE ROOM LIGHT
a. Using a screwdriver, remove the room light cover.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and room light, then disconnect the connector.
13. Standard cab:
REMOVE COAT HOOK