Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
2. DISCONNECT CONNECTOR
Pull out the release bar, and disconnect the connector.
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 5 brake lines from the ABS actuator.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
4. REMOVE ABS ACTUATOR ASSEMBLY
Remove the 3 nuts and ABS actuator assembly.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
5. REMOVE ABS ACTUATOR
a. Remove the 3 nuts and ABS actuator from the actuator bracket.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
b. Remove the 3 holders and 3 cushions from the ABS actuator.
INSTALLATION
Installation is in the reverse order of removal.
HINT:
^
After installation, fill brake reservoir with brake fluid and bleed brake system.
^
Check for leaks.