Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
4.
With ABS:
Disconnect ABS speed sensor and wire harness clamp from steering knuckle.
Remove the 2 bolts and disconnect the ABS speed sensor and wire harness clamp from the steering knuckle.
5.
Disconnect brake line.
Using the following SST, disconnect the brake line. Use a container to catch the brake fluid.
SST P/N: 09023-00100
6.
Remove brake caliper and disc.
A.
Remove the bolt and brake line clamp from the steering knuckle.
B.
Remove the 2 bolts, brake caliper, and disc.
7.
Remove shock absorber.